Keo dính Aron Alpha

Mô tả: Cung cấp các sản phẩm keo dính Aron Alpha hãng Toa Gosei Nhật Bản
Giá bán: Vui lòng gọi
Tình trạng: Mới 100%
Xuất xứ: Toa Gosei
Ngày đăng: 04-01-2014

Chi tiết sản phẩm

 

Characteristics of Aron Alpha


Instant glue Adhesion is achieved in a few seconds. It is well suited for increasing the efficiency of the adhesion process.

Excellent workability It is a one-liquid type with superior workability due to its ability to adhere at normal temperature.

High adhesive strength It strongly adheres on a wide variety of materials.

Chemical resistance It is highly resistant to many chemical products.

Environmental friendliness It is an adhesive without any organic solvent and it has low toxicity.

Wide range of products Products with a wide range of viscosity are available from low viscosity to gel type products. 
Products can be selected by application and function such as impact resistant type and flexible type.

 

General physical properties of Aron Alpha


Before curing (liquid state)
Systems 100 series EXTRA® 200 series
400X series
500 series 600 series 800 series 900P series GEL-10
Appearance Colorless transparent liquid
Specific gravity (d204) 1.100 1.050 1.050 0.978 1.004 1.069 1.090 1.090
Boiling point(ºC/667Pa) 55~57 60~62 60~62 78~80 68 200 - 60~62
Flash point(ºC)closed-cup model 83 83 83 95 77 112 83 83
Ignition temperature(ºC) 465 485 485 410 463 330 330 485
Freezing point(ºC) 1.5 -29.6 -29.6 -2.1 -18.7 ≦-20 ≦-20 ≦-20
Hazard Hazardous material type 4, type 3 petroleum 
Hazard class III, flammable liquid

After curing (solid state)
Appearance Colorless transparent solid
Specific gravity(d204) 1.253 1.248 1.248 1.125 1.156 1.168 1.200 1.290
Hardness(Shore D, 23ºC) 90 90 90 80 80 60 30 90
Glass transition temperature(ºC) 170 140 140 125 115 80 80 140
Softening temperature(ºC·Vicat method) 165 145 145 110 110 60 - 145
Linear expansion coefficient(×10-4) 0.9 1.1 1.1 1.3 1.5 1.0 1.1 1.1
Dielectric tangent(10MC,10ºC) 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07
Dielectric constant(10MC,10ºC) 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5
Dielectric breakdown voltage(kV/0.1mm,23ºC) 14 14 14 14 14 14 14 14
Volume insulation resistance(Ωcm·30ºC) 1014 1014 1014 1014 1014 1014 1014 1014
Soluble in the following solvents Dimethylformamide
Dimethyl sulfoxide
Acetone, dimethylformamide, and dimethyl sulfoxide


 

Grades of Aron Alpha


Faster and stronger…

select the product according to function and application
 

*Besides the major grades, various grades are available according to different adherends and setting times. 
Please consult us and we will assist in the selection of the most suitable grade for your use. 

 

    Applications and characteristics Series Major grades
Functions
 
Highly functional type A grade with good overall balance EXTRA®2000 EXTRA®2000,EXTRA®2020
Anti-impact and heat resistant type A grade with superior adhesive durability EXTRA®4000 EXTRA®4000,EXTRA®4020
General purpose type Suitable for mainly adhesion on metals No. 100 101,102
Can be used for a wide range of applications and adherends. No. 200 201,202,221,222,232,241,253
Heat resistant and impact resistant type Suitable for vibrating areas such as motors and bearing No. 400 401,402,401X,402X,403X
Low odor and low frosting All-purpose type with low odor and low frosting No. 500 501,502,503
Water resistant type Maintains strong adhesion at high humidity No. 600 601,602
Odorless and non-frosting type A grade without problems of odor and frosting No. 800 801,802 (not suitable for some adherends; in such a case, use No. 500)
Flexible type Suitable for flexible materials such as rubber, films, and leather goods No. 900 911P2,911P3,901H2
Ultra high viscosity, thixotropic type Suitable for permeable and porous materials GEL GEL-10
Fast curing type To be used when faster adhesion is desired compared to the all-purpose type F 201F,202F,221F,232F,252F
Slow curing type To be used when slower adhesion is desired compared to the all-purpose type M 201M
Temporary and removable type Easily removable after adhesion S 201S
Semi-structural type Increased peeling strength after a thermal cycle T 403T,432TW
Medium viscosity, thixotropic type Excellent coating without dripping TX 203TX,273FTX
Colored product To be used when a clear indication of where the adhesive was placed is desired (red and blue available) Special order item 101,201

 

 

 
 
 
Applications For wood Suitable for use in woodworking and wood molds For wood For wood, for wood F, for wood V, for wood molds, and for precious woods
For stones Suitable for fixation or repair of stones For stones For stones F and high viscosity type for stones
For cultured marble Suitable for processing cultured marble For cultured marble Clear type for cultured marble, white type for cultured marble, and white F type for culture marble
For metal plated surfaces To be used for adhesion of metal-plated materials 600P system 601P,601PF

Brands may be discontinued without notice.